热线电话:13472265816

  • 联系我们
  • 河北巨强泵业有限公司
  • 保定市安国市石佛镇石佛村
  • 联系人:赵立建(经理)
  • 电话:0312-3596262

新闻动态您当前的位置是:首页>>>> 新闻动态

柴油机防汛排涝泵
作者: 浏览次数:

 电动机接地安装检查:关于水泵与电动机共轴的电泵,电动机应在恰当位置上设有接地螺钉,并在接地螺钉左近设有接地标志;小型潜水泵应有牢靠的接地安装和接地线,引出电缆的接地线上应有明显的接地标志;该标志应在电机运用期内不易被磨掉。此项是电泵的重要平安指标之一。

 
混流泵运转、运转应平稳,无异常振动和噪声,油封处无明显走漏,轴承工作温度不应高过75℃。
 
依据采购所需的流量、扬程、轴功率、效率、必需气蚀余量(或吸程)和运用条件,初步肯定混流泵 的型号,选择额定值与所需参数相同的泵

Motor grounding installation inspection: for the electric pump in which the water pump is coaxial with the motor, the motor shall be equipped with grounding screw at the appropriate position, and a grounding mark shall be set near the left of the grounding screw; The small submersible pump shall be provided with reliable grounding installation and grounding wire, and the grounding wire of the outgoing cable shall be provided with obvious grounding mark; This sign shall not be easily worn off during the operation period of the motor. This is one of the important safety indicators of electric pump.

The operation of the mixed flow pump should be stable without abnormal vibration and noise. There should be no obvious leakage at the oil seal. The working temperature of the bearing should not be higher than 75 ℃.
According to the flow, head, shaft power, efficiency, necessary cavitation allowance (or suction) and application conditions required for procurement, preliminarily confirm the model of mixed flow pump, and select the pump with the same rating and required parameters