不晓得大家对双吸泵的理解有几，那么今天我们就从根本的说起，为了满足工况的需求，它主要是保送一些颗粒物的介质等等，那么在停止工作前首先我们需求对它停止装置，如何装置以及装置的位置选择你又晓得几呢？一同来理解一下吧。
1、在确保平安的状况下，双吸泵（单级双吸离心泵）装置位置尽可能靠近水源和陡坡，以缩短进出水管的长度，减少不用要的弯管和接头，以减少漏气可能和扬程损失。
2、它（单级双吸离心泵）需求距河面或进水池水面的垂直高度，在枯水位时必需小于中开泵的允许吸水扬程，且在洪水时节不吞没机组。
3、装置双吸泵的地基应巩固、枯燥，以免中开泵在运转中因震动形成下陷和电机受潮。
4、装置的地点要有足够的工作场地，以便拆卸和检修。
在对双吸泵停止装置完毕后，我们还需求对它停止一定的试行工作，以确保它在装置过程中的平安，降低装置时的出错率，那么就希望大家可以学有所用了。
I don't know what your understanding of double suction pump is. Today, we will start from the fundamental point of view. In order to meet the requirements of working conditions, it mainly recommends some particulate matter medium, etc. then before stopping working, we need to stop the device, how to select the device and the location of the device. What do you know? Let's understand.
1. Under the condition of ensuring safety, the double suction pump (single-stage double suction centrifugal pump) is located as close as possible to the water source and steep slope, so as to shorten the length of the inlet and outlet pipes, reduce unnecessary bends and joints, and reduce the possibility of air leakage and head loss.
2. It (single-stage double suction centrifugal pump) requires a vertical height from the river surface or the water surface of the intake pool, which must be less than the allowable suction head of the pump in the dry water level, and it does not engulf the unit in the flood season.
3. The foundation of the double suction pump should be consolidated and dry, so as to avoid the sinking caused by vibration and the motor getting damp during the operation of the pump.
4. The location of the device should have enough working space for disassembly and maintenance.
After stopping the installation of double suction pump, we need to carry out some trial work on it to ensure its safety in the installation process and reduce the error rate of the installation, so we hope you can use what you have learned.
