关于渣浆泵的日常保护是很重要的,对渣浆泵保护好的话会低落许多的生产老本,还可以有效的延伸渣浆泵的应用寿命。渣浆泵在事情的时候,泵是需求放在大地上的,吸水管放在水中。因为渣浆泵的事情情况相对恶劣因此在应用的时候还是需求仔细一点的,辣么我们在应用过程当中需求留意甚么呢?那接下来就让渣浆泵厂家的小编为大家介绍一下吧。
一:启动前必须包管泵轴的转向与泵壳上箭头指导方向一致
电念头试转时必须与泵完全离开
严禁电念头带动泵轴反向扭转,不然将导致零件损坏
第二:填料密封的泵
开车前必须按要求增加盘根
包管密封用轴封水的供应。严禁无水运行
开车前应按油标的油位线加油,严禁无油开车,不然轴承将销毁
第三:各固定持续部位应无松动
各指导仪表安全保护装置均应灵敏、准确、可靠
第四:不应有冲突
用手按渣浆泵滚动方向滚动轴,轴应能带动叶轮滚动,不应有冲突,不然应调解叶轮间隙。
The daily protection of the slurry pump is very important. If the slurry pump is well protected, it will reduce many production costs and effectively extend the service life of the slurry pump. When the slurry pump is working, the pump needs to be placed on the ground, and the suction pipe is placed in the water. Because the situation of slurry pump is relatively bad, it needs to be more careful in application. What should we pay attention to in the application process? Then let the slurry pump manufacturer's editor introduce it to you.
First: before starting, make sure that the steering direction of the pump shaft is consistent with the direction of the arrow on the pump housing
The motor must leave the pump completely during the test run
It is strictly forbidden to drive the pump shaft to reverse rotation by electric thoughts, otherwise the parts will be damaged
Second: pump with packing seal
Packing must be added as required before start-up
Guarantee the supply of shaft seal water for sealing. Do not operate without water
Before start-up, oil shall be added according to the oil level line of the oil standard. It is strictly prohibited to start-up without oil, or the bearing will be destroyed
Third: all fixed continuous parts shall be free of looseness
All safety protection devices of guiding instruments shall be sensitive, accurate and reliable
Fourth: there should be no conflict
Press the rolling direction of the slurry pump by hand to roll the shaft. The shaft shall be able to drive the impeller to roll without any conflict. Otherwise, adjust the impeller clearance.