渣浆泵分析其轴功率过大的原因与解决方法：
发生原因：填料压盖过紧，填料发热，泵内生产摩擦，轴承损坏，驱动装置皮带过紧泵流量偏大，转速偏高，比重大，电机轴与泵轴不对中或不平行。
解决办法：松填料压盖螺栓，消除摩擦，更换轴承，调整皮带，调节泵的运行工况调节转速，调整电机轴和泵轴。
The reason and solution of excessive shaft power of slurry pump are analyzed
Causes: the packing gland is too tight, the packing is hot, the production friction in the pump, the bearing is damaged, the drive device belt is too tight, the pump flow is too large, the speed is too high, the ratio is significant, the motor shaft and the pump shaft are not aligned or parallel.
Solution: loosen the packing gland bolt, eliminate friction, replace the bearing, adjust the belt, adjust the operating condition of the pump, adjust the speed, adjust the motor shaft and pump shaft.
